|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
What can i say but i would have been lost without your support.
Thank You!
;
Très satisfait ! envoi rapide, Grand catalogue disponible. Many thanks !
;
Delivery came quite promptly and in a very readable format. Thank you.
;
I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Thank you.
Leonardo
;
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
Extraction (Ducted)
The cooker hood is more effective when installed in the extraction mode (ducted to the outside). Venting kits may be purchased through your retailer or DIY store, and must be evacuated through an outside vent of ø125 (5ins) or ø150mm (6ins). The ducting used must be manufactured from fire retardent material conforming to the relevant British Standard or DIN 4102-B1. When the cooker hood is ducted to the outside the charcoal filter must be removed.
Fitting the Ducting
� Fit the ø150mm (6ins) ducting to the spigot on top of the hood body as illustrated. � When using ø125mm (5ins) ducting fit item 9 and 10 on to the spigot on the top of the hood body as illustrated. � For the best performance use the shortest possible run of ducting and we recommend the use of rigid pipe in preference to flexible hose as this will improve the flow of air while reducing turbulence, which causes noise and a loss of performance. � If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler, then its flue must be be of the room sealed or balanced flue type. � If other types of flue or appliances are fitted ensure that there is an adequate supply of air to the room. � The cooker ducting when fitted in the extraction mode must never be connected to central heating flues, radiators or water heaters.
ø 125 ø 150
9
10
Recirculation Mode
The cooker hood is supplied specified for use in the recirculation mode, with the charcoal filter fitted. In the recirculation mode contaminated air is passed through the charcoal filter to be purified and recirculated into the kitchen through the grille outlets on either side of the chimney. � Assemble the two halves of the ducting extension pipe item 14. � Push-fit the extension pipe on to the ducting spigot on top of the canopy. � Push-fit the recirculation adapter item 15 on to extension pipe item 14. � Insert the recirculation outlet extensions item 14.4 into the recirculation adapter item 15. � The recircualtion grilles item 8a and 8b must be fitted after the lower chimney item 2.2 has been fitted. � Ensure the activated charcoal filter has been fitted. 8b 8a 14 15 14.1
7
|
|
|
> |
|
